[vc_row][vc_column][vc_column_text]

This experiment will demo how to flash self scratch and soft-keyboard system[/vc_column_text][vc_tour][vc_tab title=”Hardware prepare” tab_id=”1419689731-1-25″][vc_column_text]2 × TF card

1 ×card reader

1 × pcDuino2

[/vc_column_text][/vc_tab][vc_tab title=”Software prepare” tab_id=”1419689731-2-50″][vc_column_text]1. Download flash tool Phoenix Card software and unzip it 软: click Phoenix Card  to download.

[/vc_column_text][/vc_tab][vc_tab title=”Operation procedure ” tab_id=”1419689785012-2-5″][vc_column_text]1.Flash core:

1.1  Put one TF card into card reader, then install to computer, open Phoenix Card software:

1.2 click “image file”, find the core file:

1.3 Click “burn”, when all the progress bar turn blue, the bottom display “burn over”, show the core flash into the TF card:

1.4 click “quit”, extract card reader, take out TF card, install it to card slot of pcDuino2, power for pcDuino2:

会看到pcDuino2上的TX灯闪烁，等待一会，TX灯不再闪烁的时候，就断开电源，取出TF卡。

2.刷系统镜像

2.1 将另外一张TF卡放入读卡器，插到电脑上，把系统镜像和update.sh文件直接复制到TF卡里面：

2.2 Connect the display screen to pcDuino2, plug in, wait for the display screen as following picture:

2.3 Install the TF card which flashed well the image system:

2.4 Wait around 10 minutes, the system will be well done. Take off the pcDuino2 power, take out TF card, then install the power again. You will see the pcDuino start into desk.

When see the Scratch and Keyboard icon, it means the system self build Scratch and soft keyboard.[/vc_column_text][/vc_tab][/vc_tour][/vc_column][/vc_row]