Introduction:

I’m Mohammad Adib, I’m from the US, I’m 17, and this was my summer project. It’s a vision I had in mind for a long time; To make a robot that I can control from anywhere. Working as a Roboticist, I make controller software for telepresence robots! So this was the perfect side project for the summer. I wanted to make a capable offroad vehicle that I can control from sitting in my room.

The Robot:

So this was the final outcome after 2 months of work. The chassis is a Wild Thumper by Dagu and I have to say its a great chassis for building robots on, and I look forward to moving the internals of this robot into the TREX chassis that is soon to release. I hope that turns better on grass and carpet.

Shortly after making the robot, I showcased it in my TEDx Talk (first video to the right).

How it works:

The Robot works by sending and receiving data over the internet using a 4G LTE Hotspot. I won’t get into the technicalities here, but it basically has a pcDuino sitting at the heart of it with a Wi-Fi dongle connected to the hotspot. The pcDuino then talks to the WIld Thumper Controller over serial and voila! We have a working Robot. The Nexus 4 mount is a 3D Printed tilt mechanism with an imbedded servo. The only purpose of the phone is additional sensors and ofcourse, Skype.

In terms of using sensors, the Robot uses a photoresistor to automatically switch on the headlights when it’s dark, but they can be manually controlled as well.

I did end up hitting it hard on a wheel one time and totally destroyed the axle on the motor. Getting the entire thing taken apart just to replace a motor (which I bought from Polulu; Thank god they exist) was a bit tedious.

Programming:

C – the Arduino on the Wild Thumper Controller needs runs Arduino C which listens for commands over the serial interface.

C++ – on the pcDuino, C++ is used to put the pins in serial mode on boot.

Python – Runs a server internally in the robot on port 8080, listening for commands to forward to the Arduino.

Java – TCP Client running all the time trying to communicate with a server if it’s up, then forwarding that data to 127.0.0.1:8080 which is the Python server on the same pcDuino.

Why use 4 different languages at the same time? Because I was feeling lazy and used what I knew, and though I’m sure it can all be done in C or Python just fine, I doubt it would make a difference since LTE itself has ping times exceeding 100ms on average. A few extra milliseconds won’t make much of a difference, and it’s already flawlessly instant.

Controllers:

The Controller mechanism can be anything with an internet connection. I used a joystick with my laptop (using C#) and also (for the most part) an Android app made specifically for this robot.

Conclusion:

All this was worth it, when I drove it far away from my house while sitting in my room controlling it. One of the coolest things I have done with a Robot yet.

This is my first LMR post, and I hope to post more of the projects I do here. Thanks to Dagu’s Oddbot for posting on LMR to get me inspired to actually showcase this thing. And thanks to Dagu for such an excellent chassis and as I said, I’ll be the first to jump on that TREX tank chassis and make that controllable from anywhere too.

The project page can be found at: http://letsmakerobots.com/node/38338