Using Python to connect RTC (I2C) to pcDuino2
This was contributed by Wojtek. Few days before I got my PcDuino and having some experiences before with other A10 […]
This was contributed by Wojtek. Few days before I got my PcDuino and having some experiences before with other A10 […]
In this tutorial, we will show how to use the Linker Real Time Clock (RTC) module on pcDuino3 Nano. Hardware […]
Here we will discuss how to configure RTC for Raspberry Pi B+. 1. Install the jumper on the headers labeled […]
TCWORD from pcDuino community posted a geeky way to add a RTC to pcDuino3. First, he soldered on a 3V […]
Designed to be used in Raspbian and It is a highly accurate real-time clock which connects via the GPIO port […]
[vc_row][vc_column width=”1/1″][vc_tour][vc_tab title=”Introduction ” tab_id=”1395588859-1-33″][vc_column_text]The Maxim DS1302 clock module can supply date and time information such asyear, month, day, hour, minute, […]
[vc_row][vc_column][vc_column_text] Linker RTC is a kind of real time clock module based on DS1307. DS1307 is a low power consumption, with 56 bytes non losing full BCD code clock calendar real time clock, the address and data are transmitted through two line two-way serial bus, the chip can supply the information of seconds, minute, hour ,etc, the day of each month can adjust automatically, it has the function of making up the leap year . AM/PM flag bit determine the clock work mode for 24 hours or 12 hours, there is a built-in power supply circuitry inside the chip, and has the power failure detection and battery switch function.[/vc_column_text][vc_tour][vc_tab title=”Part list” tab_id=”1394162684-1-74″][vc_column_text]1 x pcduino v2 1 x Linker RTC Linker kit 20cm connect […]
[vc_row][vc_column][vc_column_text]Description: This is a RTC module with Linker kit standard connection. It has an I2C interface. Note: The battery is […]
18.1 Add support for RTC Linux 2.6.25.8 has completed support for RTC. We only need to add RTC device […]