[vc_row][vc_column][vc_column_text]In this project, we will control three different LEDs independently with three different buttons.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_tour][vc_tab title=”Wiring Diagram” tab_id=”1394775422-1-76″][vc_column_text][/vc_column_text][vc_column_text][/vc_column_text][/vc_tab][vc_tab title=”Arduino Code” tab_id=”1394775422-2-91″][vc_column_text]

int redled = 10;
int yellowled = 9;
int greenled = 8;
int redpin = 7;
int yellowpin = 6;
int greenpin = 5;
int red;
int yellow;
int green;
void setup()
{
pinMode(redled,OUTPUT);
pinMode(yellowled,OUTPUT);
pinMode(greenled,OUTPUT);
pinMode(redpin,INPUT);
pinMode(yellowpin,INPUT);
pinMode(greenpin,INPUT);
}
void loop()
{
red=digitalRead(redpin);
if(red==LOW)
{ digitalWrite(redled,LOW);}
else
{ digitalWrite(redled,HIGH);}
yellow=digitalRead(yellowpin);
if(yellow==LOW)
{ digitalWrite(yellowled,LOW);}
else
{ digitalWrite(yellowled,HIGH);}
green=digitalRead(greenpin);
if(green==LOW)
{ digitalWrite(greenled,LOW);}
else
{ digitalWrite(greenled,HIGH);}
}

[/vc_column_text][/vc_tab][/vc_tour][/vc_column][/vc_row]