LinkSprite AISHOP uses facial recognition camera to do face based people counting for brick and mortar store, customer management and loss prevention and security. In addition, it can be used for small business and home security to keep track of the person lingering around the premise.
AISHOP provides web (aishop.deepcam.com) and mobile apps (android and iOS) clients. Search “NowYouKnow” in google play to find the Android app.
Whichever way you choose, the basic steps are as follows:
Using web application:
Click on the link below to enter the user login page of AISHOP.
Click on ‘Sign Up’, then fill in the relevant information as required below,
After click send, check the verification code in the email. If the code doesn’t show up, it could be tagged as spam by your mail provider.
Click Submit to register, and then you can log in to your account.
When you first log in to your account, it will be shown below:
The first step is to Add Store
The lat and long will be filled automatically when you click the point on the map where the camera is installed. Note: it doesn’t need to be accurate.
The second is to Add Device
a) Enter the camera name and MAC address in turn.The camera MAC address can be obtained by wrapping or by removing the bottom cover of the camera to view the fuselage tag.( The bottom cover of the camera is snap-fastened and can be removed directly without tools.)
The MAC address is a 12-bit string consisting of only numbers and letters. It must be filled in all uppercase. Do NOT put colon.
b) Select “deepcamFaceCapture” for device type
c) Select the corresponding stores that the camera needs to add through the drop-down box in turn
d) Click [Submit] to complete the device addition.
e) On the [Device List] page, you can query the list of added cameras. At this time, the online status is red, indicating that the device is offline.
f) Power cycle your camera, and waits for about 3 to 6 minutes. When you refresh the page, you can find that the online status is green, indicating that the device is online.
If the camera is powered on before adding the device, please power on the device again and follow the steps described above to ensure that the device is online.
Visiting Records Enquiries
Click [Store] →[Visiting Records], you can select the time to query the visit record.
After clicking on any face image, the detailed information of the face image will appear, and the face will be clustered and displayed.
There are two ways to add the target person: one is to input the external face photos, the other is to add the face captured by the device.
Method 1: Select [Subject] → [Add Subject] to add face photo from the local PC
a) Select the photo of the person you want to add from the local PC.
b) When a person’s photo is added from a local PC, the system will detect and intercept the face part of the photo. If there are more than one person in the photo, the system will return several face photos for selection. Please click on the face photo of the target person you want to add.
c) Enter the name of the target person in turn, select the corresponding grouping, choose whether to open the message push or not, and choose to enter the comment information.
d) Click [Submit] to complete the entry of the target person addition
f) Click [Subject List], you can see the successfully added person and modify their names, groupings, whether to open message push, notes.
Method 2: Click on [Stores] → [Visiting Records], then click on the photo of the target person you want to input. and input the captured face by clicking on “Add Subject”
Adding More Face Photos To The Target Person
Click [Subject] →[Subject List], then click icon to add more face photos of target persons.
a) Drag the appropriate threshold and click [Search]
b) In the search results, select the clear face photos of the same person that you want to append and click on [append]. Maximum 5 face images are allowed to be appended by association.
c) When the addition is successful, the result will be displayed on the right side of the person’s main picture, as shown in the following figure
d) Additional images can be deleted. It should be noted that the first registered face image, that is, the main image of the person is not allowed to be deleted, and can only be operated by deleting the target person, but also means that the subsequent identification records of the person before deletion can not be queried.
How to adjust the focal length
LinkSprite facial recognition camera has adjustable focal length. We can use tool on PC named ONVIF device manager that is freely available downloadable from here.
Please download this free tool named Pconfig from here if ONVIF does not work by now. Then open the tool to follow the steps:
- Click “search” button first.（Click pictures to view clearly）
2. Finding the corresponding IP address according to the MAC number.( The camera MAC address can be obtained by wrapping or by removing the bottom cover of the camera to view the fuselage)
- Put the IP address into research engine (IE browser only).
Now, you can view the real-time video from the camera.
How to Remote View Using Mobile APP
Install mobile APP UvSmart.
Add the LinkSprite Facial Recognition Camera in UvSmart APP. Click the menu button in the upper left corner, then click “Device manager”, fill in the “Device ID”, “User ID”, “Password” as required, and click “Add”, as shown below: (The “Device ID” is the device UUID code, the “User ID” is ‘SnApAdm1n’, and the password is the key of the facial capture camera, which can be viewed on the camera body.)
After the device is successfully added, click on the camera to view the video in real time, as shown below: