[vc_row][vc_column width=”1/1″][vc_column_text]The components used in this experiment are shown below: The components are: one LED (any color works) one 470 […]

[vc_row][vc_column width=”1/1″][vc_column_text]The components used in this experiment are shown below: The components aer one red LED, one green LED, one […]

[vc_row][vc_column width=”1/1″][vc_column_text]The components used in this experiment are shown below: The components are one LED (color depends on pepole),one 470 […]

[vc_row][vc_column width=”1/1″][vc_column_text]In this experiment,we are going to use a potentiometer  to adjust the voltage level of the input signal to […]

[vc_row][vc_column width=”1/1″][vc_column_text]The components used in this experiment are shown below: The components are seven LEDs (colors can be chosen according […]

[vc_row][vc_column width=”1/1″][vc_column_text]The components used in this experiment are shown below: The components are one diode, one 470 ohm resistor,2 jumper […]

[vc_row][vc_column width=”1/1″][vc_column_text]The components used in this experiment are shown below: The components are one diode, one 470 ohm resistor,2 jumper […]

[vc_row][vc_column width=”1/1″][vc_column_text]The components used in this experiment are shown below: The components are one LED, one 470 ohm resistor,2 jumper […]

[vc_row][vc_column width=”1/1″][vc_column_text]The components used in this experiment are shown below: The experiment needs only the Arduino board.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_tour][vc_tab title=”Wire […]