How to develop Android APK on pcDuino by QT5.
We can use QT5 to write program for Android, especially the developer who ere not familiar with Android SDK or JAVA. The […]
We can use QT5 to write program for Android, especially the developer who ere not familiar with Android SDK or JAVA. The […]
[vc_row][vc_column width=”1/1″][vc_column_text]pcDuino can display sensor waveform under Android system. Run IOIOSensorGraph.apk and change input signal via Rotary Potentiometer Module[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_tour][vc_tab title=”Hardware list” […]
[vc_row][vc_column][vc_column_text] This tutorial will show how to test/change light and temperature with LDR Module and Linker_Temp via IOIOTempLight [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_tour][vc_tab title=”Hardware list” tab_id=”1390384551-1-77″][vc_column_text] 1*pcDuino […]
The default audio output is to HDMI. Some times our monitor does not have speaker, we need use USB sound […]
[vc_row][vc_column][vc_column_text]In this tutorial, we are going to demo two parts: 1. Using the UHF demo GUI, and host PC GUI […]
SM5100B only supports AT commands. Host uses AT commands to dial a number, send SMS, and GPRS connection. SM5100B DTU […]
By default, the frequency band is 900/1800. If for North America, you need to set to 850/1900. AT command will […]
Below is a country-by-country listing of GSM frequencies being by GSM cell phone providers. For any country where all cell […]
To use Mamba, you need two Mamba shields and two Arduino uno. Arduino IDE can be downloaded from: http://arduino.cc/en/Main/Software. In this […]
In this tutorial you will learn how to re-create an Apple iPod Shuffle by using the original image from apple’s […]