pcDuino3 hardware watchdog
This post was contributed by viulian. I’ve decided to investigate the watchdog functionality of my pcDuino3 as a fail safe […]
This post was contributed by viulian. I’ve decided to investigate the watchdog functionality of my pcDuino3 as a fail safe […]
Uboot command: Connect serial debug cable to the debug port, and launch the hyper-terminal. Press any key at boot up to […]
Install pcduino-linux-headers-3.4.79+ and compile driver on pcDuino 1 ) uncomment 2 wiimu source $ sudo nano /etc/apt/sources.list $ sudo […]
The new batch of pcDuino v2 upgraded the Wifi module to be 8188EUS (Green color) from the previous 8188EUS (Black […]
For pcDuin1 and pcDuino2, overclocking needs to recompile kernel. The places need modification are the following: 1. sunxi-boards/sys_config/a10/pcduino.fex [target] boot_clock […]
[vc_row][vc_column][vc_column_text]In cases, we would like pcDuino to boot from a network hosted file system. In this tutorial, we will explain […]
A10 boot overview A10 is a quite ‘closed chip’. There is a brom in the chip, which can not be […]
[vc_row][vc_column width=”1/1″][vc_column_text]These instructions are for installing the latest copy of openFrameworks for sunxi using the mali framebuffer and rather than […]
This patch will add a basic board support DT for the LinkSprite pcDuino. Signed-off-by: Zoltan HERPAI <wig…@uid0.hu> — arch/arm/boot/dts/Makefile […]
distribution images for different use, with updated kernel that supports iptables. Installation via dd or win32diskimager. at least 2gb scmicro […]