LinkSprite Learning Center

January 22, 2014 0 Comments

How to modify the default audio output

The default audio output is to HDMI. Some times our monitor does not have speaker, we need use USB sound […]

RFID

January 21, 2014 0 Comments

[vc_row][vc_column][vc_column_text]In this tutorial, we are going to demo two parts: 1. Using the UHF demo GUI, and host PC GUI […]

Shields

January 21, 2014 0 Comments

SM5100B only supports AT commands. Host uses AT commands to dial a number, send SMS, and GPRS connection. SM5100B DTU […]

Shields

January 21, 2014 0 Comments

By default, the frequency band is 900/1800. If for North America, you need to set to 850/1900. AT command will […]

January 20, 2014 0 Comments

Below is a country-by-country listing of GSM frequencies being by GSM cell phone providers. For any country where all cell […]

Shields

January 20, 2014 0 Comments

To use Mamba, you need two Mamba shields and two Arduino uno. Arduino IDE can be downloaded from: http://arduino.cc/en/Main/Software. In this […]