一：Product outlook

1： Print part

2： Feeding part

二：Test procedures

1：Assembly   (plug-in interface easy assembly)

Insert the feeding connect cable to the printer，then fix by screw.

feeding pipe plug and spring self lock fastener

Connect the feeding pipe，and fix by screw

2： Operate

Use open source software with simple interface.

Use SD slot to input file, use Gcode file to do one key print,  function  is  normal.

2： suspend and recover the print

The suspend and recover function could be achieved during print process.

Click the button shown in below photo, the ongoing printing work could be suspended,  the consumptive materials could be replaced during the time.

Click the button shown in below photo, continue the print work.

3：stop printing and breakpoint continued

FGLDM 01 series 3D printer support breakpoint continue function. The printer could continue to work on previous base after being stopped. Click the button shown in below photo, the ongoing print work could be suspended.

The system will remind “do you want to save the condition in order to continue at the breakpoint next time?”.

Select YES to save

Select NO means don’t save.

Select CANCEL just cancel this operation.

If select YES, the printer will save the ongoing condition, and when open the file to print next time, system will remind “last print is interrupted, continue to print at the breakpoint or not?”

If want to continue print on previous base, select YES.

If want to restart the print, select No.

Test result

1：The functions operate normally

2： Print show