Who is Otto?

An interactive robot that anyone can make!
Otto walks, dances, makes sounds and avoids obstacles.
Is completely open source, Arduino compatible, 3D printable, and with a social impact mission to create an inclusive environment for all kids.

Otto was inspired by another robot BoB the BiPed and programmed using code from another open source biped robot Zowi.

CC-BY-SA

Otto’s differences are in the assembled size (11cm x 7cm x12cm), cleaner integration of components and expressions. Using off the shelf and 3D printed parts, simple electronics connections (almost no welding required), and basic coding skills, you will be able to build your own cute Otto friend in as little as two hours!

Otto is designed using Autodesk 123D Design software you can modify it for customization or further improvements!

Gather all the off the shelf parts that you’ll need for this assembly.

List of parts:

1. Arduino Nano; preferable with the pins already weld it
2. Arduino Nano Shield I/O Extension Board Expansion XD-212
3. Mini usb cable. (most Arduino dealers provide the cable)
4. HC-SR04 Ultrasound sensor.
5. Mini servo SG90 9g x4 (each one should come with 2 pointed screws and one small screw).
6. 5V Buzzer.
7. Female to Female breadboard connectors cable 10cmx6.
8. 4 AA Battery case
9. 1.5V AA batteries x4.
10. Mini cross screwdriver. important magnetized

And then you only need to 3D print 6 parts in total:

1. 3D printed head.
2. 3D printed body.
3. 3D printed leg x2.
4. 3D printed right foot.
5. 3D printed left foot.

Print or download to your device the attached OTTO_InstructionManual_V02.pdf

For the programming:

1. Download & Install Arduino IDE:
   https://www.arduino.cc/en/Main/Software
2. Copy Oscillator libraries to C:\Users\user\Documents\Arduino\libraries (or wherever your library folder is installed):
3. Finally open & upload OTTO_smooth_criminal.ino code to your Arduino Nano for dancing Otto.

More codes in https://github.com/OttoDIY/