Command line style

The quickest way to get going with Arduino sketches is to start with the samples so you have a ‘template’ to guide you. For parts of this guide to work, you’re pcDuion8 Uno needs to be connected to the Internet and you also need a terminal session running on the pcDuion8 Uno.

Setup(one time)

Do this using the command

cd ~ 
git clone https://github.com/pcduino/c_enviroment

Cloning into ‘c_enviroment’… remote: Counting objects: 250, done. remote: Compressing objects: 100% (166/166), done. remote: Total 250 (delta 87), reused 232 (delta 69) Receiving objects: 100% (250/250), 302.59 KiB | 78 KiB/s, done. Resolving deltas: 100% (87/87), done.

Initial Look Around

You should now have a folder called c_enviroment. You can check by typing : ls -l c_enviroment

Makefile hardware libraries output sample

Change into the c_envoroment folder and run make to make the libraries and the examples:

cd c_envoroment
make