[vc_row][vc_column][vc_column_text] The DiamondBack is an Arduino Duemilanove compatible clone that has 802.11b wireless connectivity baked directly onto the board.  The […]

[vc_row][vc_column width=”1/1″][vc_column_text]In this project, we will demo how to use the redback WiFi module to read the temperature data from […]

[vc_row][vc_column][vc_column_text]In this tutorial we are going to use Dust sensor on pcDuino to measure air pollution pm2.5. [/vc_column_text][vc_tour][vc_tab title=”Dust Sensor […]

[vc_row][vc_column][vc_column_text]   SHT1X (10/11/15) sensor which integrates the sensing element and signal processing circuit on a mini PCB, and outputs full calibration digital signals. Sensor includes a humidity […]

[vc_row][vc_column width=”1/1″][vc_column_text] I/O Expander shield is a shield used to expand the number of I/Os of an Arduino Uno. It […]

[vc_row][vc_column width=”1/1″][vc_tour][vc_tab title=”Introduction” tab_id=”1395915647-1-74″][vc_column_text]RS485 shield adds a RS485 signal translation to TTL UART of Arduino Uno. RS485 signal uses a […]

[vc_row][vc_column][vc_column_text] CuHead WiFi shield Version 2.0 is the shield you need to get Wi-Fi connectivity to your Arduino-based project.  It […]

[vc_row][vc_column width=”1/1″][vc_column_text]The serial UART 16×2 LCD allows you to control a parallel based LCD over a single-wire serial interface. The […]

[vc_row][vc_column width=”1/1″][vc_column_text] Linker 1×2 Button Matrix module has two buttons sized 6x6x5mm. In this project, we will look at how […]