A high level SOPC diagram is shown in the following figure. The following flow chart illustrates the procedure used to […]

    Create a directory named sopc_led_bf, and under that directory create a project named sopc_led_bf. Run SOPC Builder and […]

[vc_row][vc_column width=”1/1″][vc_column_text] Experiment 1 Use Button KEY1 on Core Board to Control LED 1 Motivation: Use a real example to […]

Download the keilC51 firmware code and build to get a hex file. This hex will be needed later. Create a […]

FPGA is of SRAM structure, and will lose the configuration once power cycled. So we need a configuration chip, EPCS4. […]

Run QII software: Close the following screen: Create a new project: File -> New Porject Wizard…. Click Next as in […]