- LinkNode D1 x 1
- Arduino IDE
1. Login linksprite.io ,and record the “Device ID” and “API key”
- 1. Register www.linksprite.io and Login this account
- 2. My Profile -> API key
- 3. My device->Create DIY Device
Enter Device Name,Device Type , Group Name , the device number is 00, device name and device grouping can be any.
Note: Device Type must be selected 00(Custom device type) .
Now you can see “test” in My Devices, Click “test” and record the Device ID.
2. Download and run the code
- 1. Download the source files
git clone https://github.com/delongqilinksprite/LinkSpriteIO.git
- 2. Put the code in the following directory(examples under Arduino installation directory )
- 3. Open the Arduino IDE, File -> Example -> LinkSpriteIO-> LinkSpriteIO.ino
- 4. Modify the “deviceID” and “apikey” with your own
- 5. Configure LinkNode D1 Engineering Environment
- 6. compile and run the code
Open the serial port and www.linksprite.io to observe phenomena.
The first use of LinkNode D1 need to connect the WiFi, the specific operation, please refer to the linksprite wiki Tutorial 4 .