[vc_row][vc_column width=”1/1″][vc_column_text]The Music Shield is a professional audio codec.It can work with Arduino, Seeeduino, Seeeduino Mega and Arduino Mega. It is based on VS1053b IC, and can play a variety of music formats stored on MicroSD cards with Seeed the provided Arduino Library.

Note:Recording is only supported on Seeeduino Mega and Arduino Mega for now.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_tour][vc_tab title=”Interface Schematic” tab_id=”1394417414-1-56″][vc_column_text]

[/vc_column_text][/vc_tab][vc_tab title=”Hardware List” tab_id=”1394417414-2-12″][vc_column_text]1. [bigcommerce link=”/arduino-uno-compatible-usb-board-r3/” target=”_blank”]Arduino UNO [/bigcommerce] x1

2. 3.5mm Headset x1

3. ≤2G MicroSD Card   x1

[/vc_column_text][/vc_tab][vc_tab title=”Testing” tab_id=”1394418530138-2-10″][vc_column_text]1. Download the two library files and move to arduino-0022\libraries

2. Add needed header files to arduino-0022\hardware\tools\avr\avr\include

3. Run arduino-0022, File -> Examples -> music_v1_14 -> music

4. Compile, download example to Arduino

5. Inside MP3 files into SD Card

6. Connecting Music Shield to Arduino, plug in SD card to Music Shield. Finally connect the headset, open the Serial Monitor (Baud Rate: 9600) on IDE, then you will hear wonderful music:

[/vc_column_text][/vc_tab][vc_tab title=”Download” tab_id=”1394421358600-3-5″][vc_column_text]

Download： library

[/vc_column_text][/vc_tab][/vc_tour][/vc_column][/vc_row]