• Home
  • pcDuino
  • WiKi
  • Store
  • Distributors
  • Home
  • pcDuino
  • WiKi
  • Store
  • Distributors
HomeArduinoShow Graphic on Arduino
Previous Next

Show Graphic on Arduino

Posted by: admin , March 6, 2014

[vc_row][vc_column][vc_column_text]tft_00_0

Touch LCD shields is a large multi-function resistive touch screens. Display effect is very good, and the SD base is integrated into the shields, and you can easily extend it to your project.[/vc_column_text][vc_tour][vc_tab title=”Part list” tab_id=”1394066573-1-49″][vc_column_text]1  x  arduino uno 1  x  touch lcd shield 1  x  tf[/vc_column_text][/vc_tab][vc_tab title=”Diagram” tab_id=”1394066573-2-92″][vc_column_text]Insert the touch LCD shields directly on the arduino, connect the arduino through the USB port to the computer. tft_00_1[/vc_column_text][/vc_tab][vc_tab title=”Test code” tab_id=”1394124899319-2-5″][vc_column_text]1.Click the ”TFT Touch” and download the touch lcd shield  arduino library:TFT_Touch 2. Unzip zhe file and put it into the path of saving the arduino program file touch_lcd_show_00 3. Open the tftbmp routine of typical example in tft_touch. touch_lcd_show_01 4. After the board card and serial port are right burnt into the arduino, you will see the result of the experiment.[/vc_column_text][/vc_tab][vc_tab title=”Test result” tab_id=”1394124900596-3-0″][vc_column_text]Put the picture into the tf card and insert it into the the card base of touch lcd shield, then press the reset key of touch lcd shield .

Touch lcd shield will show the picture in the card from left to right.

Notice: the size of picture must be 320 * 240 the format must be bmp.[/vc_column_text][vc_gallery type=”flexslider_fade” interval=”3″ images=”4160,4159,4158,4157″ onclick=”link_image” custom_links_target=”_self”][/vc_tab][/vc_tour][/vc_column][/vc_row]

Tags: Arduino

Share!
Tweet

admin

About the author

Leave a Reply Cancel reply

You must be logged in to post a comment.

Category

  • Home
  • pcDuino
  • WiKi
  • Store
  • Distributors