[vc_row][vc_column width=”1/1″][vc_column_text]If you are not aware, pcDuino adds support of Ethernet over USB from version 20131127. This feature allows pcDuino to be connected to a PC through USB OTG, and users can VNC to pcDuino through USB OTG instead of Ethernet connection.
We have a laptop with Windows 7, and don’t have HDMI monitor and keyboard/mouse for pcDuino, so we would need to VNC to pcDuino.
[/vc_column_text][vc_tour][vc_tab title=”Windows 7 Driver” tab_id=”1388116970-1-87″][vc_column_text]We first power up pcDuino through the USB power port, and then connect pcDuino’s USB-OTG to laptop using a USB data cable.
Let’s first make sure Windows recognize the pcDuino:
Before pcDuino plugged into laptop
After pcDuino connected to PC:
We found that there is a new network adapters named ‘USB Ethernet’ appears. This is pcDuino.
If you windows doesn’t recognize the pcDuino, please download the driver at: http://www.driverscape.com/download/rndis-ethernet-gadget[/vc_column_text][/vc_tab][vc_tab title=”Configure Network Properties” tab_id=”1388116970-2-27″][vc_column_text]We found the USB Ethernet at Control Panel->Network and Internet->Network Connections:
Right click it to configure the properties:
Select TCP 4, and configure exactly same as below:
[/vc_column_text][/vc_tab][vc_tab title=”RealVNC” tab_id=”1388118350307-2-5″][vc_column_text]We would like to use RealVNC (http://www.realvnc.com/) as the VNC client. Please go to the website to download RealVNC.
After download, we can launch RealVNC:
The IP address of VNC server (which is the IP address of pcDuino) is 192.168.100.1. After we filled the IP address, press ‘Connect’:
The password is ‘ubunut’ , all lower cases, and click ‘OK’, we will get the desktop of pcDuino!