On pcDuino8 Uno, if you want to viewer website which contains flash content, the browser will notice you that you should install flash plugin. And this post will tell you how to install this flash plugin.
It is best used on pcDuino8 Uno, because this is pure software rendered and will use a lot of CPU. You need to have Chromium installed.
wget https://s3.amazonaws.com/pcduino/Tools/PepperFlash-22.214.171.124-armv7h.tar.gz tar -xzf PepperFlash-126.96.36.199-armv7h.tar.gz cd PepperFlash chmod +x * sudo cp * /usr/lib/chromium-browser/plugins
or later version. With the same steps as above, just replace version numbers as required. Uncomment the line starting with “CHROMIUM_FLAGS=”. Add the following line.
sudo vim /etc/chromium-browser/default
Add the following line:
CHROMIUM_FLAGS=”–ppapi-flash-path=/usr/lib/chromium-browser/plugins/libpepflashplayer.so –ppapi-flash-version=188.8.131.52 -password-store=detect -user-data-dir”
- Open Chromium-browser
- Enter chrome://plugins
- The pepperflash-plugin should be visible. Enable it.
Flash animations work well, Flash video to a certain degree, depending on video resolution. There are reports though that Spotify specifically may not work because of lack of NPAPI in Pepper Flash, but some recent changes may have fixed it.
Leave a Reply
You must be logged in to post a comment.